IntelliGain
User Manual
IntelliGain
- 12
Revision 1.6
3.1.9. Setting the Makeup Gain (If Available)
Program 1
The
Makeup Gain
control is used to add additional gain to the audio
program. This control would be used if the final desired target loudness
has not been reached.
Makeup Gain
0 to 20 dB
3.1.10. Setting the Peak Limit
Program 1
The
Peak Limit
control is used within the audio program chain to
provide an upper limit to peak program levels. Sometimes referred to
as a “brick-wall” limiter. This control is used to maintain the upper limit
of the peak levels.
Peak Limit
-15 to –1 LKFS
3.2.
INTELLIGAIN LOUDNESS MONITORING
Figure 3-2: IntelliGain Loudness Monitoring View
3.2.1. Monitoring the Input Loudness
Program 1
The
Input Loudness
control will provide a real time value of the
calculated input loudness value. This control is used for monitoring
purposes only.
Input Loudness
Read Only Monitor