5
SPECIFICATIONS
TOOL SPECIFICATIONS
MODEL
ECAR-S & ECAR-D
HEIGHT
35.24” (895mm)
WIDTH
2.18” (55.4mm)
LENGTH
18.23” (463mm)
WEIGHT
7lbs. (3.2kg)
OPERATING PRESSURE
70 to 100 psi (5 to 7 bars)
LOADING CAPACITY
100 Staples
AIR CONSUMPTION at 80 psi (5.6 bar) pressure
0.064
ft
3
(1.8 liter/cycle)
FASTENER SPECIFICATIONS
MODEL
ECAR-S & ECAR-D
LENGTH
3/4” or 1” (19 or 25mm)
CROWN WIDTH
3/8” (9.5mm)
WIRE DIAMETER
0.062 x 0.057” (1.6 x 1.4mm)
OPERATING PRESSURE
70 TO 100 psi (5 to 7 kg/cm
2
). Select the operating pressure within this range for best fastener performance.
DO
NOT EXCEED THIS OPERATING PRESSURE.
TECHNICAL DATA
AIR CONSUMPTION
The tools require
ECAR-S, ECAR-D: 3.82 cfm (1.8 liter/second)
of free air to operate at the rate of 60 nails per minute, at 80 psi (5.6 kg/cm2). Take the actual rate at which the tool will
be run to determine the amount of air required. For instance, if your fastener usage averages 30 nails per minute, you
need 50% of the tool air consumption in running at 60 nails per minute.
NOISE
A-weighted single-event sound power level LWA, 1s:
ECAR-S, ECAR-D
: 93.0 dBA
A-weighted single-event emission sound pressure level at work station LpA 1s,d:
ECAR-S, ECAR-D
: 83.7 dBA
VIBRATION
Vibration characteristic value for
ECAR-S, ECAR-D
: <2.5 m/s
2
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-system
when
using the tool. An influence to the hand-arm-system when using the tool will for example depend on the
gripping force, the contact pressure force, the working direction, the adjustment of mains supply the workpiece
support.
