2
8. GPS signal indicator
9. Power
indicator
10. Touch Screen
11. On/Off
12. GPS antenna
13. Speaker
14. Software reset button
15. Hardware reset switch
16. Stylus
17. External power connector
18. USB connector
19.
External antenna connector
2) Charge the Battery
1
. The Nav-Cam 7000 will arrive from the factory with the “Hard
Reset” switch (shown as 15 on the diagram) in the OFF
position. This is to preserve the battery.
The first time you use the device you will need to move the
“Hard Reset” switch to the ON position. Simply slide the switch
across using the point of the stylus.
2. Connect the AC adaptor to the external power connector on
your Nav-Cam 7000.
3. Plug the AC adaptor into the main power supply
NOTE:
Charge the Nav-Cam 7000 for at least 4 hours before initial use.
