background image

9

DVI to VGA Adapter

Use the DVI-to-VGA Display Adapter that came with 
your EVGA GTX 285 graphics card to connect a 
display with a VGA connector to the DVI port on the 
graphics board.

Connecting Your Display

Connect a Display that has a DVI connector to either DVI port on your graphics card.

1. DVI port 2
2. DVI port 1

1

2

10

Technical Support: 

EVGA is dedicated to supporting our products.  If you need to contact Customer Service, please 
have your system configuration ready, as well as your model number and serial number ready. 
You will need to register your product before a support technician can assist you. You may 
register your product online at: 

http://evga.com/register

, or when you call for support, a staff 

member will register you.

•     Hours of Operation: 24/7 Technical Phone Support
•     Phone Support: (888) 880-EVGA (3842)
•     Fax Support: (714) 528-4501
•     Tech Support Web Site: 

http://evga.com/support

  

Warranty Information:

For warranty information on this product, please visit: 

http://evga.com/warranty/

.

 

As a valued 

EVGA customer; you will be sure to receive a warranty that will fit your needs.

EVGA Advanced RMA (EAR) Program:

The EVGA Advanced RMA (EAR) Program is a program to protect yourself and your product 
in the case of product failure. For more details please visit: 

http://evga.com/EAR

EVGA Online Community:

To visit the EVGA community message boards, please visit: 

http://forums.evga.com

(English) GTX 285

GTX 285 (English)

Summary of Contents for GTX 285







Reviews: