EVGA SC15 GEFORCE GTX 1060 GAMING, User Manual

20

Remove Warning

Removing the sticker on the screw hole indicates the chassis has been opened.

If chassis is opened all components must be returned to original condition before

returning for service.

Opening the chassis does NOT void the warranty if it is returned to original condition

before returning for service.

21

  Compliance Information

FCC Compliance Information

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that 

may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to 

radio communications. However, there is no guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 

measures: (1) Reorient or relocate the receiving antenna, or (2) Increase the separation between the equipment and 

receiver, or (3) Connect the into an outlet on a circuit different from that which the receiver is connected, or (4) consult 

the dealer or an experienced radio/TV technician for help. Changes or modifications to this unit not expressly approved 

by the party responsible for compliance could void the user’s authority to operate the equipment.

Federal Communications Commission (FCC) Radiation Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE 1-1999 and had been

tested in accordance with the measurement methods and procedures specified in IEEE 1528-2013.

Contains Transmitter Module FCC ID : 2AG9J826ONG

CE Compliance Information

Generic Radiation Interference Standard for Information Technology Equipment. (EN 55022: 2006, Class B), (EN 61000-3-2: 2006), 

(EN 61000-3-3: 1995 + A1: 2001 + A2: 2005). Warning: This is a Class B product. In a domestic environment this product 

may cause radio interference in which case the user may be required to take adequate measure. Generic Immunity

Standard for Information Technology Equipment.(EN 55024: 1998 + A1: 2001 + A2: 2003).

Trademark & Copyright Information

2001-2017 EVGA Corp. EVGA, the EVGA logo and combinations thereof are trademarks of EVGA Corp. All brand names, 

company names, service marks, logos, and trademarks of the company, or its affiliates or licensors are trademarks or

registered trademarks of the company or its subsidiaries, affiliates or licensors in the US and other countries. Other

company, products and service names may be trademarks or service marks of others. EVGA reserves the right to

terminate this license if there is a violation of its terms or default by the Original Purchaser. Upon termination, for any 

reason, all copies of Software and materials must be immediately returned to EVGA and the Original Purchaser shall be 

liable to EVGA.com CORP for any and all damages suffered as a result of the violation or default.

Legal Information

All material including but not limited to, text, data, design specifications, diagnostics, graphics, logos, reference boards, 

files, images, drawings, and software including this document and the software itself (together and separately) is owned,

controlled by, licensed to, or used with permission by EVGA Corporation and is protected by copyright, trademark, and

other intellectual property rights. All is being provided “as is”, EVGA Corporation makes no warranties, whether express

or implied, statutory or otherwise with respect to the materials and expressly disclaims all implied warranties of 

non-infringement, merchantability, and fitness for a particular purpose. In no event shall the liability of EVGA Corporation

for claims arising from the use of the materials by anyone exceed the original purchase price of the materials (or

replacement of the materials at EVGA Corporation’s option). All information furnished is believed to be accurate and

reliable. However, EVGA Corporation assumes no responsibility for the consequences of use of such information or for 

any infringement of patents or other rights of third parties that may result from its use, or use of the Software. No license

is granted by implication or otherwise under any patent or patent rights of EVGA Corporation except as expressly 

provided herein.  All specifications mentioned in this publication are subject to change without notice

.

CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type.

Dispose of Used Batteries According to the Instructions.

ENERGY STAR certified product

ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of 

Energy helping us all save money and protect the environment through energy efficient products and

practices. All EVGA products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the 

power management feature is enabled by default. The monitor and computer are automatically set to sleep 

after 15 and 30 minutes of user inactivity. To wake your computer, click the mouse or press any key on the keyboard.

Please visit http://www.energy.gov/powermanagement for detail information on power management and its benefits

to the environment. In addition, please visit http://www.energystar.gov for detail information on the ENERGY STAR 

joint program.

NOTE: 

Energy Star is NOT supported on FreeDOS and Linux-based operating systems.