7
SZX2-ILLTQ/ILLTS
Maintenance and storage
Do not leave stains or fingerprints on the lenses and filters. If they get dirty, blow away dust with a
commercially available blower and gently wipe the lens or filter with a piece of cleaning paper (or clean
gauze).
Only when cleaning fingerprints and oil stains, slightly moisten a piece of cleaning paper with commercially
available absolute alcohol and wipe them off with it.
Since the absolute alcohol is highly flammable, it must be handled carefully. Be sure to keep it away
from open flames or potential sources of electrical sparks. For example, the electrical equipment that
is switched ON and OFF may cause the ignition of a fire. Also, always use absolute alcohol only in a
well-ventilated room.
Wipe the portions other than the lens with a dry soft cloth. If the dirt cannot be removed by dry-wiping,
moisten a soft cloth with diluted neutral detergent and wipe the dirty surface with it.
Do not use organic solvents because they may deteriorate the coated surface or plastic parts.
The stage surface is designed as a simple waterproof structure. However, in case of spilling water, set the main
switch to (OFF), disconnect the power cord and wipe off water from the stage immediately with a dry cloth, etc.
If water enters inside, contact Olympus for assistance and make sure of the electric safety.
WARNING
NOTE
Lifetime
The lifetime of this product is approximately 8 years after purchase if the product is used properly according to this
instruction manual (this does not apply to consumables).
If the rubber leg of SZX2-ILLTSA (High stability adapter for ILLT) is deteriorated, its anti-vibration property is decreased due
to the nature of the rubber. In this case, we recommend you to change the rubber leg of SZX2-ILLTSA.
There is a fee for replacing the rubber legs of SZX2-ILLTSA even within one year after delivery.
Cleaning of each unit
