16
7-2 Detailed Assembly Procedures
1
Installing the Microscope Body
a
· Loosen the body clamping knob a and insert the microscope body
gently.
· The body clamping knob a can be attached to any of the
three positions b around the arm. After installation, attach the
knob to a position so that the knob does not come in the way
of the light source, etc.
· If you always perform observation from the side of the focus
adjustment knobs, the microscope body can be installed in
the opposite orientation to that shown in figure (at the 180°
rotated position).
TIP
3
Mounting the Stage Plate
Mounting
While applying the stage plate c to the stage plate holder spring
d , fit the stage plate into the hole and push it from upward to secure
the mounting.
The stage plate c has the milky white and black surfaces.
Select the side facing up according to the specimen.
1
TIP
b
c
d
c
Dismounting
Push the stage plate edge near the holder spring d . As this moves up
the opposite edge of the stage plate, dismount it by holding that edge.
1
