STEP 29: Prepare for the “green” ring.
[Bulbdial Assembly Guide]
[35]
The “main assembly” that we’ve
built up thus far, complete with
standoffs & clock face.
Hex wrench
Long 4-40 screws
“Red” circuit board
30 Green* LEDs
#16B
,
pre-form these, as in step 14.
(*Again, for monochrome kits, just grab 30 LEDs,
#16
.)
Now we gather up parts to build the
green (middle) ring of the clock.
Before proceeding to the next step,
pre-bend the 30 LEDs that we’ll need.
“Green” circuit
board,
#2