4
1 GENERAL INFORMATION
1.1 Warnings
The ModuSat unit requires mains electrical connections and connection to the primary, low
temperature hot water system and mains cold water supply to function.
A pre-installation rig is available to the installer to help position and space the pipe
connections to the unit during first fix, prior to the ModuSats being delivered to site.
Installation must be carried out by a competent engineer in line with current regulations.
Failure to read and follow the instructions provided within this document may cause
potential injury or failure of the equipment.
Therefore it is advised that the installer reports any equipment faults or defects to an
authorised Evinox representative.
Any modifications or adjustments carried out without EVINOX official authorisation will
invalidate the warranty and absolves Evinox from any liability.
Evinox has the right to make any changes or modifications to the products without prior
notice.
1.2 Symbols
Follows a list of symbols used in this manual:
IMPORTANT NOTE REGARDING CORRECT
INSTALLATION
IMPORTANT NOTE REGARDING PERSONAL SAFETY
AND CARE
CAUTION !
DANGER OF ELECTRICAL SHOCK!
CAUTION !
1.3 Safety
Instructions
All installation and maintenance operations
must be carried out by competent engineers
according to current regulations
In case of water leaks:
Disconnect the electric power supply
Slowly close the main water isolation valves to the unit
Inform Evinox or approved Evinox engineer
We recommend the unit is checked at least once a year by an
authorised
maintenance engineer. If the unit is subject to excessively heavy usage or non
domestic installations (for example in a light commercial environment), we
recommend having it checked more than once per year.
Disconnect the electrical supply prior to starting any work on a ModuSat
TP.
