EVO-1121B 2007+ Jeep JK Evap Skid
Part#
Description
Qty
EVO-12057B
Evap Main Skid
1
EVO-12058B
Evap Skid Rear Mount
1
EVO-770048
EVO Evap Hardware Pack
1
Installation photos shown are on a 2012 + Jeep Wrangler JK, for those installing
the EVO Evap Skid on a 07-11 Jeep JK follow the same install procedures.
NOTES PLEASE READ BEFORE INSTALL
Keep All Mounting Bolts loose until all bolts are installed into place. Then tighten all bolts.
Throughout the install there is no need to remove any of the factory hoses or factory evap
mounting bracket. You will only be required to remove the factory bracket from the
crossmembers.
