19
Do not ignite burners or use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area
while you check for gas leaks. Flames and sparks will result in a fire or explosion which can cause serious bodily injury or
death and damage to property.
n
DANGER
Note:
All factory-made connections have been thoroughly checked for gas leaks. The burners and ignition system has been
flame tested. As a safety precaution, we recommend you recheck all fittings for leaks before using your Evo grill. Shipping and
handling may loosen or damage a gas fitting.
To perform a leak check you will need a solution of soap and water and a brush or rag to wet all gas connections.
1.
Turn all control knobs to the OFF position
2.
Turn on gas supply and check for leaks by wetting the connections with the soap and water solution and watching for
bubbles. If bubbles appear, or if a bubble grows, there is a leak.
Note:
Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed
with water after checking for leaks.
CHECK ALL GAS CONNECTIONS:
1.
Hose to Regulator.
2.
Regulator to Gas Supply connection.
Perform leak checks even if your grill was dealer or store
assembled.
You should check for gas leaks every time you disconnect
and reconnect a gas fitting.
n
WARNING
n
WARNING
13. Gas Soundness
Summary of Contents for AGA AGA-10-0096-LP-CE
Page 31: ......
