22 | en
Setting of welding parameters
Setting the welding method
the selection and confirmation of the welding method is carried out using the
control button.
MMA
- a method designed for welding with a coated electrode crNi, al, alloys
and steel materials.
TIG LIFT
- the method is designed for welding of crNi and steel materials with
dc current. it also allows soldering.
MIG/MAG manual
- the method is designed for welding of steel, crNi and al
materials. it also allows soldering cusi. user setting of all welding parameters.
MIG/MAG synergic
– the method is designed for welding of steel, crNi and al
materials. it also allows soldering cusi. preset programs.
Spool Gun
- the method is designed for welding of crNi and al materials with
spool Gun torch.
Metoda
MMA
select the welding method by turning the n-coder and confirm by pressing
it.
Welding methode
N-coder
after confirming the method selection, a screen appears with the option to
set the selected functions. You can skip the settings by pressing the home
button and go to the work screen, or you can select a function with the n-co
-
der and press to confirm the selection. You can then adjust the value of the
function. to return to the function menu, press the Back button. if you do
not want to edit other functions, press the n-coder to go to the work screen.
MMA
- Setting the hOT START
(easier ignition)
the function allows setting the value of the welding current increase when the
arc is ignited. the function facilitates ignition of the welding arc. the function
is set in the range of 0 - 10, which sets its intensity (0 = off; 10 = maximum).
the function can be modified when selecting a method (see description abo
-
ve) or during operation on the work screen. activation on the work screen is
done by pressing the back button. the function is selected by gradually rota
-
ting the n-coder. press the n-coder to confirm the function selection. after
setting the appropriate value of the function, press the n-coder to return to
the work screen.
available functions
N-coder
Back button
home button
setting the value of the function
N-coder
Back button
home button
Working screen
N-coder
Back button
home button
MMA
- Setting the ARC FORCE function
(arc stability)
the function increases the energy supplied to the shortening arc by the
mma method, thereby accelerating the electrode melting and preventing
it from sticking. the function is activated when the arc voltage drops below
approx. 17 v. setting the value determines the possible increase in welding
current. the function is set in the range 0 - 10, which adjusts its intensity (0 =
off; 10 = maximum). the function can be modified when selecting a method
(see description above) or during operation on the work screen. activation on
the work screen is done by pressing the back button. the function is selected
by gradually rotating the n-coder. press the n-coder to confirm the function
selection. after setting the appropriate value of the function, press the n-co
-
der to return to the work screen.
available functions
N-coder
Back button
home button
