background image

-20-

warranty

WARRANTY

Warranty Coverage:

  

Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original purchaser that each new product to be free from

defects in workmanship and material, under normal use and conditions.

Period of Coverage:

  The Warranty on this product runs for the period of the lifetime of the original purchaser.  This is a Parts-only

Warranty, labor is not included.  Smooth Fitness reserves the right to inspect damaged parts for misuse.

Light Institutional Warranty:

  This product carries a warranty for light commercial applications (non-membership selling gyms).  Parts

are warranted for a period of one year including frame, pulleys, bearings and all other mechanical parts. Upholstery and cables carry a
90- day warranty.  This is a Parts-Only warranty.  Customer is responsible for shipping charges on parts going outside the continental
United States.

It is recommended that the Original Receipt be kept with the product manual.

Remedy Provided by Smooth Fitness:

 

 Smooth Fitness will provide a replacement part free of charge if a defect is found during the

Warranty period.  You must pay any charges for shipping and handling outside of the Continental United States and for labor.  To obtain
service call your local Smooth Retailer or call 888-800-1167.

Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to the original
product.  Any technical advice furnished before or after delivery in regard to the use or application of Smooth Fitness products is furnished
without charge and on the basis that it represents Smooth Fitness' best  judgment under the circumstances but that the advice is used
at your sole risk.

Procedure for Obtaining Your Remedy Under This Warranty:

 

 To obtain service call your local Smooth Retailer or call

888-800-1167.  To help us assist you, please have the following information ready:
 

Model name or number from the cover of the manual;

 

Serial number located on the frame of the unit; and
The part description and the order number.

Limitations on Warranty:

  

This Warranty does not apply to you if you have purchased this product for resale.  This Warranty does not

cover any problems, damages or failures that are caused by accident, improper assembly, failure to observe cautionary labels on the
product, failure to operate the product correctly, abuse or freight damage.  Smooth Fitness does not warrant against any damage or
defects that may result from repair or alterations made to the product by an unauthorized repair facility.

This Warranty shall terminate if you sell or otherwise transfer this product.  This Warranty does not apply to any product shipped or
handled outside of the United States.  This Warranty does not apply if the product is used for rental or commercial use.  Consequential
and incidental damages are not recoverable under this Warranty.  (Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.)

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES.  ALL IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE
(1) YEAR FROM THE EFFECTIVE DATE OF THIS WARRANTY. SMOOTH FITNESS IS NOT LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR ANY BREACH OF EXPRESS OR IMPLIED
WARRANTIES.  SMOOTH FITNESS' SOLE LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE TERMS DESCRIBED IN THIS
FORM.  THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.

For assistance with assembly or to order replacement parts, simply call our Customer Service Department at 888-800-1167, Monday
through Friday (excluding holidays) 8:00 am to 4:00 pm eastern daylight time.  To help us assist you, please have the following information
ready:

  

Model name or number from the cover of the manual;

  

Serial number located on the frame of the unit; and

  

The part description and order number.

Summary of Contents for SIERRA 53553





























Reviews: