background image

 

Copyright Notice 

Information offered in this manual is believed to be correct at the time of printing, and 

is subject to change without prior notice in order to improve reliability, design and 

function and does not represent a commitment on the part of the manufacturer. In no 

event will the manufacturer be liable for direct, indirect, special, incidental, or 

consequential damages arising out of improper installation and/or use, or inability to 

use the product or documentation.   

This user manual is protected by copyright. No part of this manual may be reproduced, 

stored in any retrieval system, or transmitted, in any form or by any means, 

mechanical, electronic, photocopied, recorded or otherwise, without the prior written 

permission from the manufacturer. 

Trademarks 

EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other 

product names mentioned herein are used for identification purposes only and may be 

trademark and/or registered trademarks of their respective companies. 

Warranty Terms: 

The warranty on the product lasts for one year. If the user has additional requirements, 

the contract signed between the two sides shall prevail.   

 

Please visit our website: http://www.evoc.com for more information,   

or send an email to the Technical Support Mailbox support@evoc.com 

(International) or support@evoc.cn (Domestic) for consultation.

 

Hotline: 4008809666 

 

 

 

 

Summary of Contents for 104-1816CL2NA






































































































Reviews: