Chapter 2 Installation
EIC2201 Serial
7
Assembly Explanation
1. Chassis Cover
2. I/O Bracket
3. Audio
4. Baseboard
5. Motherboard
6. Chassis Body
7. Fan
8. Fan Bracket
9. Hanger
10. Captive Screw
11. Front Panel
12. LED Board Bracket
13. LED Board
14. Hard Disk Bracket
15. Hard Disk
16. Baseboard Bracket
17. Power Bracket
18. ATX Power
1.
Install the Hard Disk
Fix the rubber mad to the hard disk bracket; install the hard disk with its bracket; fix
the hard disk component via screws in the prereserved place in the chassis. Pay
attention to the direction of hard disk interface during the installation.
2.
Uninstall/Install the baseboard and motherboard
Uninstall the baseboard and motherboard at the same time, and assemble the new
ones; then put them in the chassis and fix the corresponding screws.
3.
Install the Expansion Card
Remove the batten firstly if an expansion card is needed; insert the expansion card
into the slot on baseboard; fix the expansion card with the batten removed just now.