14
© by NECTA VENDING SOLUTIONS SpA
0303 204-00
S
TATISTICS
Data on the machine operations is stored in both general
counters and relative counters, which can be reset without
losing total data.
Connect an RS232 serial printer having a Baud rate of
9600, 8 data bit, no parity, 1 stop bit to the serial port
located on the push-button board to print all of the statis-
tics, and namely:
Total
- counter by single selection
- counter by time bands
- failure counter
- photocell errors
- motor errors
- dispensing compartment lock errors
Relative
- counter by single selection
- counter by time bands
- failure counter
- photocell errors
- motor errors
- dispensing compartment lock errors
The hardcopy printout will also contain the machine infor-
mation, and namely:
- date/time of print
- machine name
- software version
- operator code
- machine code
- Installation date.
To connect the printer, do as follows:
- press the confirm print key “ ”, displaying the mes-
sage “Confirm?”;
- connect the printer before confirming;
- press the confirm key “ ” to start printing.
DISPLAY
When pressing the confirm key “ ” the data described in
the paragraph “Printing the statistics” is sequentially dis-
played.
RESETTING THE RELATIVE STATISTICS
Statistics can be reset for relative counters globally (all
types of data) or selectively for:
- selections
- failures
- photocell errors
- motor errors
- dispensing compartment lock errors
Press the confirm key “ ”, and the message “Confirm?”
starts blinking.
Press the confirm key “ ”, the message “Working” is
displayed for a few seconds and all statistics are reset.
PRICES FOR SINGLE SELECTIONS
This function is used to change the sales price for each
selection according to the time band.
Key
is used to access directly the price/selection
combination settings, if the function is enabled in the
“Technician” menu.
SPECIAL SELECTIONS
VIRTUAL SELECTIONS
This function is used to define a pair of selections that can
be sold at a price different from the sum of the two
selections, using a single selection number. 10 virtual
selections can be programmed (70 to 79).
RETURN OF VIRTUAL PRICE
This function is used to define, in the event of failed second
dispensing in a virtual selection, not to cash the price of the
second selection (only if an MDB payment system or
validator are used). With other payment systems, it can be
decided whether or not return the entire amount.
SELECTIONS WITH TWO MOTORS
The machine can be set up to dispense long products, and
dividers can be fitted so that two motors are used for each
single selection.
With this function the operation of two motors can be
combined, specifying the selection number of the second
motor.
The first motor number will be the selection number, while
the selection number of the associated motor will remain
disabled.
Important notice!
After a failure to the motors of these selections, the
machine configuration procedure in the “Spiral/Selec-
tion” menu must be followed.
DISPENSING DETECTION
The vending machine can be fitted (as standard feature or
as optional according to the model) with a device that, by
means of photocells, detects the passage of dispensed
products.
This device permits, in the event of failed detection of the
dispensed product:
- set a rotation time for the spiral beyond the limit switch,
to overcome any jamming;
- return or not the paid amount;
- block further selections for the involved spiral.
Summary of Contents for Snakky SL
