18
© by NECTA VENDING SOLUTIONS SpA
0303 204-00
PROGRAMMING PARAMETERS
CASH
This set of functions controls all parameters regarding the
payment systems and the sales prices.
SELECTION PRICES
Four different prices can be set for each selection accord-
ing to the programmed time bands for when the time table
option is set.
For each of the 4 time bands prices (0 to 65,535) can be
programmed globally (same price for all selections) or for
the single selections.
Should the majority of products be sold at the same price,
it will be convenient to set the price globally and then
change the figure of the selections with different prices.
TIME BANDS
Four programmable time bands are provided for selling
products at different prices.
The time periods are programmable for beginning and end
time by hours (00 to 23) and minutes (00 to 59).
If the values for start and end of the time band are set to
00.00 the time period is disabled.
The reference time is kept by an internal clock, program-
mable as:
day/month/year week-day 1-7
and then
hour/minutes/seconds.
MASTER/SLAVE
The machine control system is pre-arranged for the con-
nection in a bank of vending machines.
This function is used for sending the information neces-
sary for controlling the payment system to the master.
IMMEDIATE CHANGE
Normally, the amount of credit inserted for a selection is
cashed after the machine sends the message “Selection
successful”.
When this function is enabled, disabled by default, the
cash message is sent at the beginning of dispensing.
SLAVE PRICE HOLDING
If an Executive payment system in “Price Holding” mode
is set in the master machine, the information must be set
also in the software of the slave machine.
COMBINED SELECTIONS
A combined selection is intended as the association of two
selections, one from the slave and one from the master, to
the same number (80 to 89) sold at a single price, different
from the sum of the prices for the two selections.
In the case of a bank with two slaves operating with three-
digit selections, the first digit (0 to 9) is displayed automati-
cally.
The related menu is used for combining a slave selection
(10 to 79) with a master selection (01 to 18 or 10 to 79
according to the type of keypad).
If one of the two selections is not available, the combined
selection is not dispensed. If the immediate change option
is not activated on the master machine, it might be
possible that the first selection fails. In this case the entire
amount is returned. If the second selection fails, it will be
possible to decide whether to keep or return the entire
amount by activating/deactivating the “Virtual change
return” option.
SPIRALS/SELECTIONS
This set of functions is used to define the selection control
parameters.
MACHINE CONFIGURATION
This function is used to detect and store the number and
position of the trays and of the selection motors.
VIRTUAL SELECTIONS
This function is used to define a pair of selections that can
be sold at a price different from the sum of the two
selections, using a single selection number. 10 virtual
selections can be programmed (70 to 79).
In the case of a bank with two slaves operating with three-
digit selections, the first digit (0 to 9) is displayed automati-
cally.
RETURN OF VIRTUAL PRICE
This function is used to define, in the event of failed second
dispensing in a virtual selection, not to cash the price of the
second selection (only if an MDB payment system or
validator are used). With other payment systems, it can be
decided whether or not return the entire amount.
SELECTIONS WITH TWO MOTORS
In order to dispense long products, dividers can be fitted
so that two motors are used for each single selection.
With this function the operation of two motors can be
combined, specifying the selection number of the second
motor.
The first motor number will be the selection number, while
the selection number of the associated motor will remain
disabled.
Important notice!
After a failure to the motors of these selections, the
machine configuration procedure in the “Spiral/Selec-
tion” menu must be followed.
PRODUCT CODE
This function is used to assign a 4-digit identification code
to each spiral for processing the statistics.
Summary of Contents for Snakky SL
