01-2019 5505 00
1
Introduction
The technical documentation supplied
is an integral part of the equipment and
it must therefore accompany the equip-
ment whenever it is either moved or
transferred to enable the various opera-
tors to consult it.
Before starting to install and use the ma-
chine, it is necessary to carefully read and
understand the content of the documenta-
tion since it can supply important informa-
tion on installation safety, utilisation rules
and maintenance operations.
Some illustrations of this manual might
show details or parts which deviate from
those of the machine without changing the
basic information whatsoever.
The manual is divided into tree chap-
ters.
The first chapter is intended to describe the
ordinary filling and cleaning operations that
shall be carried out in areas of the machine
that can be accessed with the simple use of
the door key, without using any other tool.
The second chapter contains the instruc-
tions for correct installation as well as the
information necessary for optimal utilisation
of the machine performance.
The third chapter is intended to describe
the maintenance operations involving the
use of tools for access to potentially dan-
gerous areas.
The operations described in the second
and third chapter must be carried out
only by the personnel who have a spe-
cific knowledge of the machine opera-
tion from the point of view of electric
safety and health rules.
TRANSPORT AND STORAGE
traNsport
To avoid any damage to the equipment and
any injury to the people, the equipment
must be handled with great care.
While handling, there is the danger of
crushing one's hands and/or feet: never
forget to use proper work gloves and
shoes.
Handle the equipment by using lifting
means suitable for the size and the
weight of the equipment (e.g. lifting
truck).
Lifting means may only be used by per-
sonnel fulfilling special requirements.
Please avoid:
-overturning and/or tilting the equipment;
-dragging or lifting the equipment by means
of ropes or alike;
-lifting the equipment by its sides;
-shaking or impacting the equipment and
its package.
storagE
The storage area must be dry and its tem-
perature lie between 0 and 40°C
If the equipment should freeze, condition it
at a temperature between 0° and 40°C.
Wait for the temperature of the equipment
to adjust to the room temperature before
powering it on.
Before powering on the equipment, please
wait for the humidity condensate (if any) to
dry completely.
