01-2019 5505 00
51
ENErgy
saviNg
To save electric energy whenever the ma-
chine is not used, you may choose among
the following energy saving profiles:
Energy Saving “On”: use this profile to
suspend the vending machine service and
to turn off the glassfront lighting in the time
intervals you have set up; the compressor
continues to work normally.
2 time bands for service interruption can be
programmed for each day of the week; the
days of the week are identified by a pro-
gressive number (1=Monday, 2=Tuesday,
etc.).
When the "energy saving" band has
tripped, selections are not available and the
glassfront lighting is turned off; the display
shows “SERVICE INTERRUPTED” and the
time at which the service will be resumed.
slEEp
moDE
Use this profile to turn off the LEDs intend-
ed to illuminate the glassfront 10 minutes
after the machine has stopped working.
Upon request for a selection, lighting is ac-
tivated and the required product dispensed.
The compressor continues to work nor-
mally.
ligHt
off
oNly
Use this profile to turn off the LEDs intend-
ed to illuminate the glassfront during the
time intervals set up whereas the compres-
sor continues to work normally.
Upon request for a selection, the machine
will dispense a product without turning on
the glassfront lighting.
m
acHiNE
ligHtiNg
out
of
sErvicE
To define whether to turn on or off the illu-
mination of the machine when the machine
is out of service or the “Energy saving” time
band has tripped.
vm
sErial
NumbEr
The function is used to change the eight-
digit numeric code identifying the machine
(00000000 by default).
programmiNg
tHE
opErator
coDE
When the display is set to the "Operator
Code" function, you can change the six-
digit numeric code identifying groups of
machines (0 by default).
iNstallatioN
DatE
The function is used to store the current
system date as the installation date.
The date is printed at the time of rolling out
statistics.
