52
01-2019 5505 00
mastEr
/
slavE
The control system of the machine is ar-
ranged for bank connection with other auto-
matic vending machines.
sEttiNgs
Use this function to set up the hierarchies
of the master / slave1 / slave2 relations be-
tween connected vending machines.
This machine can be configured as a “Mas-
ter”, i.e. controlling the second machine,
or as a “Slave”, i.e. controlled by the other
machine.
Moreover, set the numbering for 2-digit
(XX) or 3-digit selections (0XX; 9XX)
The master/slave function is not enabled by
default.
s
lavE
pricE
HolDiNg
If the Executive payment system is set to
“Price Holding”, use this function to set up
the same mode even in the slave machine
software.
v
irtual
pricE
rEturN
If the payment system is set to the BDV
and/or Executive protocol and in case of
combined or virtual selections (whose rela-
tive menus are made available on slave
machines), use this function to establish
whether to retain (OFF) or not (ON) the
partial amount if the second selection / dis-
pensing cycle should fail.
r
EsEt
miNislavE
Use this function to reset all settings rela-
tive to the master/slave function on the
slave machine.
m
oNitor
slavE
Use this function to scroll all information on
any slave, if connected.
After setting up this function, power on the
“slave” machine to sequence-display the
slave information about:
-Software release
-Type of slave (XX, 0XX, 9XX)
-Presence of the photocells intended to
detect the dispensing cycle
-Number of trays and drawers
-Presence of the device intended to pre-
vent the dispensing compartment from
opening
-Temperature measured by the internal
probe
To quit the function, power off the “master”
machine.
Display
slavE
iNformatioN
Use this function to display the instantane-
ous temperature of the “slave” machine, if
connected.
