background image

Page 5. 

Safety / Handling of Wheelchairs

 

 
Safety and handling of the Mighty Wheelchair requires the close attention of the 
wheelchair user as well as the assistant.  This manual points out the most 
common procedures and techniques involved in the safe operation and 
maintenance of the Mighty wheelchair.  It is important to practice and master 
these safe techniques until you are comfortable in manoeuvring around the 
frequently encountered architectural barriers. 
 
Use this information only as a basic guide.  The techniques that are discussed on 
the following pages have been used successfully by many users. 
 
Individual wheelchair users often develop skills to deal with daily living activities 
that may differ from those described in this manual.  All warnings and cautions 
given in this manual MUST be followed. 
 
Techniques in this manual are a starting point for the new Mighty wheelchair user 
and assistant with safety as the most important consideration for all.  
 

Stability and Balance

 

 
To assure stability and proper operation of your Mighty wheelchair, you must at 
all times maintain proper balance.  Your Mighty wheelchair has been designed to 
remain upright and stable during normal daily activities as long as you do not 
move beyond the centre of gravity. 
 
Virtually all activities which involve movement in the Mighty wheelchair have an 
effect on the centre of gravity.  Use the adjustable seatbelt for additional safety. 
 
DO NOT lean forward out of the Mighty wheelchair any further than the length of 
the armrests.  Make sure the castors are pointing in the forward position 
whenever you lean forward.  This can be achieved by advancing the Mighty 
wheelchair and then reversing a little  in a straight line.

 

Summary of Contents for LM9707










Reviews: