Oxford
®
Oxford Transaid 130
294000.10398 Rev A
2. Carton Contents
• 1 x Oxford Transaid 130
• 1 x Back support (white)
• 1 x Seat (black)
• 1 x User manual
Place the carton in a clear working area and open carefully.
WArNING
The oxford Transaid is heavy and should be lifted carefully out of the carton by a minimum of two people.
When lifting the Transaid, ensure good manual handling practice is maintained. To avoid injury, Do NoT
attempt to lift the Transaid by holding onto the back support.
Remove the packaging supplied with the Oxford Transaid 130. Check the contents of the carton against the
list above.
3. General Guidance for Use
The Oxford Transaid is designed to assist with care duties for patients who have some difficulty walking but
have the ability to stand independently. Using this device assists the caregiver to be able to move the patient
safely and efficiently. The Oxford Transaid is not suitable for patients with low cognitive ability or little or no upper
body strength. The patient must be able to weight bear and also be of a cooperative disposition.
Should you have any doubts about using this product, please contact your local Oxford distributor or Joerns
Healthcare. Please note, the Oxford Transaid is composed mainly of stainless steel and is therefore suitable for
use in wet areas.
The Oxford Transaid can be used for the following types of transfer:
• From a chair/wheelchair to and from the toilet
• From a chair/wheelchair to and from a bed
• From a chair/wheelchair to and from the shower
