Oxford
®
Oxford Transaid 130
294000.10398 Rev A
WArNING
• The oxford Transaid 10 is designed to facilitate the transfer procedure. Any other use is not permitted.
• The oxford Transaid has a maximum safe working load of 10kg. Do NoT exceed the safe working load.
• ALWAYS maintain a clean and tidy working environment.
• ALWAYS plan the transfer operation before commencing.
• ALWAYS carry out transfer operations according to the instructions in this user manual.
• Do NoT push the oxford Transaid at speeds exceeding a slow walking pace.
• The oxford Transaid 10 should be used by competent, trained personnel only.
• The oxford Transaid 10 should be maintained and serviced at least once a year, by a competent person.
• Should the oxford Transaid be damaged during normal use or in transit, the product must not be used.
please contact your local oxford distributor or Joerns Healthcare.
• The patient should ALWAYS be seated during the transfer and the back support should be positioned
behind the patient.
• The oxford Transaid should only be used on flat surfaces.
• only approved genuine spares should be used when replacing parts.
• Do NoT use the back support to lift the product when transporting or storing the device.
• Do NoT park the oxford Transaid on any sloping surface, loaded or unloaded.
• Do NoT manoeuvre the oxford Transaid down steps, loaded or unloaded.
• When inserting the back support into the transfer position, care must be taken so as not to injure the patient.
• Do NoT attempt to lift the Transaid whilst the patient is seated or standing in the unit.
