MOVING BEAM 12X10 Manual Ver. 1.02
Page 13
•
Introduction
Thank you for selecting this professional fixture from evolite
This new intelligent Moving Beam will provide you reliability, latest features, and
professional lighting effects for a long period of time.
This evolite fixture is complying with European standards: EN60598-
1:2008+A11:2009 EN60598-2-17:1989+A2:1991 et RoHs.
•
Device Description
>
12pcs 10w CREE Quadcolor LEDs with RGBW colors
>
Compact lightweight Narrow beam angle
>
Positioning within 630° PAN and 200° TILT
>
Stepless RGBW color changing
>
Different dimmer speeds (step response) adjustable
>
Master dimmer
>
8 internal programs can be called up via Control board
>
Color-macro-function for an easy selection of possible color-combinations
>
Strobe effect with 1-18 flashes per second
>
Random strobe effect
>
Exact positioning via 16 bit PAN/TILT movement resolution
>
Automatic position correction
>
DMX-controlled operation or stand-alone operation with Master/Slave function
>
Sound-control via built-in microphone
>
Control board with graphic LCD display for adjusting the DMX-starting address, PAN/TILT reverse,
program, reset, operating hours
>
Switch-mode power supply
>
Automatic power supply adaption between 100 and 240 Volts without power selector
>
DMX control via every standard DMX controller
•
Installation
o
Rigging
The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1
hour without any harming deformation.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working load limits,
installation material being used, and periodic safety inspection of all installation material and the projector. If
you lack these qualifications, do not attempt the installation yourself, but instead use a professional structural
rigger. Improper installation can result in bodily injury and or damage to property. The fixture has to be installed
out of the reach of people
Always secure your fixture with a safety cable !
