-10-
MIDI THRU/OUT output
The amplifier has MIDI THRU/OUT output, where received MIDI data are sent (THRU
feature) and
where Program Change commands are sent by the amplifier (OUT feature).
The Program Change command is sent each time the preset is recalled by footswitch in GREEN,
YELLOW, MAGENTA or RED mode. The table above shows the preset numbers of Program
Change command. This allows control of e.g. multi-effects processor plugged to the amp's FX
Loop. Before use set the
amp’s MIDI transmit channel (see
MIDI transmit channel setting
) same as
receive channel e.g. of multi-effects processor.
MIDI receive channel setting
1. Switch the amplifier off with the POWER switch.
2. Switch MODE switches of both channels and hold them in down position. Switch the
amplifier on. Cyan color of FX LOOP indicator confirms the setting of MIDI receive channel.
3. CLEAN/CRUNCH and OVERDRIVE channel MODE indicators shows the actual MIDI
receive channel (see the table below).
4. Set the chosen channel with the CLEAN/CRUNCH channel MODE switch.
5. Save the setting with the STORE switch. Short flashing confirms saving.
6. Use any other switch to exit the setting mode.
MIDI transmit channel setting
1. Switch the amplifier off with the POWER switch
2. Switch MODE switches of both channels and hold them in up position. Switch the amplifier
on. Green color of FX LOOP indicator confirms the setting of MIDI transmit channel.
3. CLEAN/CRUNCH and OVERDRIVE channel MODE indicators shows the actual MIDI
transmit channel (see the table below)
4. Set the chosen channel with the CLEAN/CRUNCH channel MODE switch
5. Save the setting with the STORE switch. Short flashing confirms saving.
6. Use any other switch to exit the setting mode.
MIDI channel number
CLEAN/CRUNCH
MODE indicator
OVERDRIVE
MODE indicator
1
BLUE
NOT LIT
2
CYAN
NOT LIT
3
GREEN
NOT LIT
4
YELLOW
NOT LIT
5
MAGENTA
NOT LIT
6
RED
NOT LIT
7
BLUE
BLUE
8
CYAN
BLUE
9
GREEN
BLUE
10
YELLOW
BLUE
11
MAGENTA
BLUE
12
RED
BLUE
13
BLUE
CYAN
14
CYAN
CYAN
15
GREEN
CYAN
16
YELLOW
CYAN
Summary of Contents for AMBER 40
Page 14: ... 14 ...