background image

WARNING: PLEASE READ THE FOLLOWING 

SAFETY INFORMATION FIRST.

DANGER: 

To avoid a possible electric shock, ensure all electrical 

devices are switched off when carrying out maintenance. Take extra 

care when handling a wet aquarium. Do not attempt repairs yourself; 

return the appliance to the place of purchase for service or dispose of 

the appliance.

•  To avoid the possibility of the appliance plug 

or socket getting wet, position the aquarium 

cabinet and tank to one side of a wall mounted 

socket to prevent water from dripping onto 

the socket or plug. You should create a “drip 

loop” for each cord connecting an aquarium 

appliance to a socket. The “drip loop” is that 

part of the cord below the level of the socket, 

or the connector. Use an extension cord,  

if necessary, to prevent water travelling along 

the cord and coming into contact with the 

socket. 

•  Always unplug an appliance from an outlet when not in use, before putting on or 

taking off parts, and before cleaning. Never pull the cord itself to remove the plug 

from the outlet. Hold the plug and pull to disconnect.

•  If the plug or socket does get wet, 

DO NOT unplug the cord

. Disconnect the fuse or 

circuit breaker that supplies power to the appliance. Then unplug the device and 

examine for presence of water in the socket.

•  Close supervision is necessary when any appliance is used by or near children.

•  Do not use an appliance for anything other than its intended use. The use of 

attachments not recommended or sold by the appliance manufacturer may cause 

an unsafe condition.

•  Do not install or store the appliance where it will be exposed to the weather or to 

temperatures below freezing point.

•   Make sure an appliance mounted on a tank is securely installed before operating it.

Read carefully all the important notices on the appliance and the corresponding 

instruction manual. 

NOTE:

 A cord rated for less amperes or watts than the appliance rating may overheat. 

Care should be taken to arrange the cord so that it cannot be tripped over or pulled 

accidentally.

DRIP LOOP

IMPORTANT 

It is important to ensure that any water that is spilled 

onto the cabinet is wiped off and dried immediately. 

Failure to do so will invalidate the warranty.

Summary of Contents for AQUASCAPER 900









Reviews: