Evolution Aqua evoUV, Installation And Operating Manual

CONNECTION TO THE ELECTRICITY SUPPLY

Electrical installations must be done by a qualified electrician.

evoUV Aquarium UV Steriliser comes supplied with a fitted plug. 

Always ensure that a drip loop is maintained when using any 
electrical equipment around an aquarium. See illustration:

Always ensure that a 
drip loop is maintained 
when using any electrical 
equipment around an 
aquarium.

The power supply must meet the specifications on the product.  
The cores in the supply cable are coloured in accordance with the following code:

Brown = Live. Blue = Neutral. Earth = Green/Yellow (WHERE FITTED).
 
Do not use the supply cable to lift the evoUV as this may cause damage. 

WARNING

 - A Residual Current Device (RCD), also known as the Residual Current 

Circuit Breaker (RCCB), with a tripping current not exceeding 30mA must be 
installed in the supply circuit. A means of disconnection from the supply having a 
contact separation of at least 3mm in all poles must be incorporated in the wiring.

Caution:

 Always disconnect all pond appliances from the mains supply before 

putting your hands into the water.

All electrical installations and wiring must be adequately protected to prevent  
any damage.

Enough electrical cable is supplied with the unit to connect to the mains electric. 
This unit must be connected to permanent wiring. A switch with 3mm contact 
separation must be provided in the fixed wiring to provide disconnection from the 
electricity supply.

11