background image

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO 

NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. 

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED wITH LIQUIDS, SUCH 

AS VASES, SHALL BE PLACED ON THE APPARATUS.

EXPLANATION OF GRAPHICAL SYMBOLS

   

 The lightning flash with arrowhead symbol, within an equilateral 

triangle, is intended to alert the user to the presence of “dangerous 
voltage” within the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to persons.

   

 The exclamation point within an equilateral triangle is intended 

to alert the user to the presence of important operating and main-
tenance (servicing) instructions in the literature accompanying 
the product.

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with a dry cloth.
7.  Do not block any of the ventilation openings. Install in  

 

accordance with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators,  

 

heat registers, stoves, or other apparatus (including  

 

amplifiers) that produce heat.

9.  Do not defeat the safety purpose of the polarized or  

 

grounding type plug. A polarized plug has two blades  

 

with one wider than the other. A grounding type plug has  

 

two blades and a third grounding prong. The wide blade  

 

or the third prong is provided for your safety. when the  

 

provided plug does not fit into your outlet, consult an  

 

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched  

 

particularly at plugs, convenience receptacles, and the  

 

point where they exit from the apparatus. Ensure that the  

 

power cord receptacle is accessible such that power can  

 

be easily disconnected if required.

11. Only use the attachments/accessories specified by  

 

the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table  

 

specified by the manufacturer, or sold with the apparatus.  

 

when a cart is used, use caution when moving the cart/ 

 

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when  

 

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing  

 

is required when the apparatus has been damaged in  

 

any way, such as power supply cord or plug is damaged,  

 

liquid has been spilled or objects have fallen into the  

 

apparatus, the apparatus has been exposed to rain or  

 

moisture, does not operate normally, or has been dropped.

   

   

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFERS SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

NO NOT OPEN

Evolution Digital HD Set-Top Box

Important Safety Instructions

FCC Information

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation.

This equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television re-

ception which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the 
following measures: 
•  Increase the separation between the equipment and receiver. 
•  Connect the equipment into an outlet on a circuit different  
 

from that to which the receiver is connected. 

•  Consult the dealer or an experienced radio/TV technician for help. 
•  Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not 
expressly approved by the grantee or manufacturer could void the user’s 
authority to operate such equipment.

Disconnection Device
Disconnect the main plug from the apparatus, if it’s defective. And please call a repair man in your location. when used outside of the U.S., it may be used 
HAR code with fittings of an approved agency is employed.

CAUTION
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that 
contained in the operating instructions unless you are qualified to do so.

Summary of Contents for DMS2004UHDS










Reviews: