6
www.evolutionpowertools.com
GENERAL SAFETY INSTRUCTIONS
Read these instructions before using this
mitre saw stand. Do not modify or use this
stand for any purpose other than that for
which it was designed.
•
Keep work area clear of obstructions
and well ventilated.
Clutter makes
accidents more likely.
•
Consider the work area environment.
Do not use power tools in damp or wet
conditions. Keep the work area well lit.
Do not use power tools in the presence
of flammable liquids or gases.
•
Keep children and bystanders away.
Visitors are a distraction and are difficult
to protect and are unlikely to have any
knowledge of safety procedures.
•
Store idle equipment.
Preferably in a
locked dry cupboard.
•
Safety Glasses.
Approved safety glasses
should be worn by the operator and any
assistants when using a mitre saw.
•
Stay alert.
A moments inattention when
operating power tools may result in serious
personal injury. Do not use if tired or under the
influence of drugs, alcohol or medication.
•
Do not overreach.
Keep proper footing
and balance at all times.
STAND SPECIFIC SAFETY INSTRUCTIONS
• For maximum stability use the mitre stand
only on a flat, level surface.
• Be careful when raising or lowering the
stand to prevent trapped fingers or hands.
• Ensure that the snap buttons on each leg
are in the locked position. This will ensure
that the stand remains rigid during
cutting operations.
• Do not step or climb on the stand.
• Before operation ensure that the mitre saw
is securely fastened to the stand to prevent
unwanted movement of the saw.
• Ensure that the material supports are
locked in place before use.
•
Do not overload the side extension arms.
• Do not use if the stand becomes damaged
in any way.
The main frame can support 225 kg (500lb)
total weight (saw + material).
Do not exceed this weight for any reason.
STAND FEATURES
• Lightweight tubular frame with ø45mm
tubular legs and crossbars.
• Extension rails adjustable to give roller
support centres from 860mm (min) to
1620mm (max).
• Mounts most mitre saws.
• Height to saw mounting base 750mm
• Height adjustable work support extensions,
support work pieces on 230mm long rollers
which are equipped with repeat cutting
stops.
Summary of Contents for 005-0001
