16
www.evolutionpowertools.com
Fig. 15
PPE
• The operator should wear all relevant PPE (Personal
Protection Equipment) necessary for the task ahead.
This could include safety glasses, full face mask, dust masks,
safety shoes etc.
Note:
This machine is equipped with a cutting line debris
blower. This directs air from a motor driven fan towards the area
to the front of the blade, thus keeping the cutting line relatively
debris free.
This feature will aid the operator’s sight and follow the progress
of the saw blade along the cut, keeping any marking-out
lines visible.
WARNING:
Any and all dust created is potentially prejudicial
to health. Some materials can be particularly harmful, and the
operator should always wear a dust mask which is suitable for
the material being worked with.
Professional help and advice should be sought if the operator
is at all unsure about the potential toxicity of the material to
be cut.
WARNING:
These machines must never be used to cut
Asbestos or any material that contains, or is suspected to
contain, Asbestos.
Consult/inform the relevant authorities, and seek additional
guidance if Asbestos contamination is suspected.
To install/remove the battery
To install the battery insert firmly into the tool until you hear an
audible click, ensuring the battery is fully seated and latched
into position.
To remove the battery depress the battery release button and
pull the battery out of the tool.
ON/OFF TRIGGER SWITCH
The ON/OFF motor trigger features an interlock safety button to
prevent accidental starts.
(Fig.15)
It is positioned on the side of
the cutting handle.
• Press the interlock safety button.
• Press the switch to start the motor.
• Release the switch to turn off the motor.
WARNING:
The motor should never be started with the saw
blade in direct contact with any surface of the workpiece.
