4
www.evolutionpowertools.com
Noise Emission
The noise emission values have been determined
according to noise test code given in EN 62841-1, using
the basic standards EN ISO 3744 and EN ISO 11201.
Warning: Wear hearing protection!
(1.8)
LABELS & SYMBOLS
WARNING:
Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
Note:
All or some of the following symbols may
appear in the manual or on the product.
Symbol
Description
V
Volts
A
Amperes
Hz
Hertz
min
-1
Speed
~
Alternating Current
no
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Do Not Touch
Wear Dust Protection
Wear Hand Protection
Read Instructions
CE Certification
UKCA Certification
TUV SUD Certification
Triman - Waste Collection
& Recycling
Waste Electrical &
Electronic Equipment
Warning
Keep away from heat and open
flames - Do not dispose in fire
Keep away from water - do not
immerse in liquids
Max temperature
DC voltage
INTENDED USE OF THIS POWER TOOL
WARNING: This product is a Compound Mitre
Saw and has been designed to be used with special
Evolution
blades. Only use accessories designed
for use in this machine and/or those recommended
specifically by
Evolution Power Tools Ltd.
WHEN FITTED WITH A CORRECT BLADE THIS
MACHINE CAN BE USED TO CUT:
• Wood, Wood derived products (MDF, Chipboard,
Plywood, Blockboard,Hardboard etc), Wood with
nails,
• 50mm mild steel box section with 4mm
wall at HB 200-220,
• 6mm mild steel plate at HB 200-220.
Note:
Wood containing non galvanised nails or
screws, with care, can be safely cut.
Note:
Not recommended for cutting galvanised
materials or wood with embedded galvanised nails.
For cutting stainless steel we recommend Evolution
dedicated stainless steel blades.
Cutting galvanised steel may reduce blade life.
PROHIBITED USE OF THIS POWER TOOL
WARNING:
This product is a Compound Mitre
Saw and must only be used as such. It must not be
modified in any way, or used to power any other
equipment or drive any other accessories other than
those mentioned in this Instruction Manual.
WARNING:
Do not allow persons unfamiliar with
the machine or these instructions to operate the
machine. Machines are dangerous in the hands of
untrained users. Children should be supervised to
ensure that they do not have access to, and are not
allowed to play with, this machine. Children should be
supervised to ensure that they do not have access to,
and are not allowed to play with, this machine.
POWER TOOL GENERAL SAFETY INSTRUCTIONS
WARNING: When using electric tools basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury
including the following.
