CHAPTER 5
REFERENCE GUIDE
EFD1000/500 MAX MFD Pilot’s Guide
Page 5-34
091-00006-002 ()
EFD1000/500 MAX MFD Pilot’s Guide
Page 5-35
091-00006-002 ()
5.3.7 Altitude Filter
The Traffic VIEW has an altitude filter, controlled by a Hot Key, allowing the pilot to set
the altitude for traffic display. There are four altitude filters available: Above, Below,
Normal, and Unrestricted
Table 5-11
. Only traffic within the selected altitude filter value
will display.
Hot Key Label
Screen Legend
Filter Level
Traffic Display Volume
TFCA
ABV
Above
+9,900 ft to -2,700 ft
TFCB
BLW
Below
+2,700 ft to -9,000 ft
TFCN
NRM
Normal
±2,700 ft
TRCU
UNR
Unrestricted
±9,900 ft
Table 5-11 Traffic Filter Parameters
The pilot adjusts the altitude filter value by pressing the TFCA/TFCB/TFCN/TFCU Hot
Key, which cycles through each of the filter levels.
5.3.8 Traffic PopUp Advisories
When the aircraft’s traffic sensor reports a Traffic Advisory, and the Dedicated Traffic
VIEW is not displayed, the EFD1000/500 MAX MFD will display an amber TRAFFIC
annunciation in the data bar (Figure 5-76). Additionally, the lower middle button
displays the label TFC in amber. Once the intruder is no longer a threat, or the pilot
presses the lower middle button, the annunciation is removed from the data bar.
Pressing the lower middle TFC button switches the display to the split screen PAGE
displaying the Traffic VIEW in the top WINDOW for situational awareness. The lower
