CHAPTER 3
DISPL
A
Y &
C
ONTR
OLS
EFD1000/500 MAX MFD Pilot’s Guide
Page 3-10
091-00006-002 ()
EFD1000/500 MAX MFD Pilot’s Guide
Page 3-11
091-00006-002 ()
The Right Knob is also used to back up through multiple information pages. The label
PUSH FOR BACK displays above the Right Knob when this feature is available. Pushing
the Right Knob will back the EFD1000/500 MFD out of information and panning, one
level at a time, to return to the basic VIEW.
3.3.2 Side Buttons
There are several buttons along the right side of the EFD1000/500 MAX MFD display.
There is a REV button for reversionary and power control, two range buttons that allow
the pilot to zoom in or out of the selected VIEW, a MENU button that activates the Main
Menu, and five Hot Keys that provide access to VIEW content sensitive functionality or
Main Menu options
(
Figure 3-10
).
3.3.2.1 Reversion (REV) Button
The REV Button is used to either manually turn off the MFD or switch (revert) the
EFD1000 MAX MFD between the MFD and PFD operating state.
3.3.2.2 Range +/- Button
The RNG+/- Button changes the map scale range for the selected VIEW, if it has a range
function (i.e. the Navigation Map VIEW). Press the RNG+ Button to zoom out (i.e. from
20nm to 30nm) or press the RNG- Button to zoom in (i.e. from 30nm to 20nm). See
Section 5.1, Navigation Map
for more detailed information.
3.2.2.3 Menu Button
The MENU Button is used to activate or exit the Main Menu. The first time the Main
Menu is accessed the GENERAL SETTINGS menu page displays; subsequently, the last
viewed menu page will display.
NOTE
The reversion function is only available on EFD1000
MAX MFD units that are configured with an EFD1000
MAX PFD.