CHAPTER 4
GET
TING ST
ARTED
EFD1000/500 MAX MFD Pilot’s Guide
Page 4-10
091-00006-002 ()
EFD1000/500 MAX MFD Pilot’s Guide
Page 4-11
091-00006-002 ()
4.2 Main Menu
The MENU Button is used to access the EFD1000/500 MAX MFD’s Menu system
to change options and also to change the EFD1000’s LCD brightness controls.
4.2.1 Using the Menus
As previously discussed, you enter MENU mode by pressing the MENU Button. The
Main MENU has several pages of information that allow the pilot to fully customize the
EFD1000/500 MAX MFD display. Pilot can view, manage, and change the settings of the
EFD1000/500 MAX MFD. Some EFD1000/500 MAX MFD Main MENU options available are:
• Change VIEW settings
• Change declutter settings
• Check the battery status
• Check the database version
• Restart the system
• View the serial number of the unit
The first MENU page is the default page, following the power cycle of the MFD. Rotating
the Right Knob navigates to different menu pages. When the EFD1000 MAX MFD is
operating in reversionary mode, pressing the MENU Button displays the PFD Main MENU.
The current Menu Page Name displays on the bottom center of the Display. Directly
below the Menu Page Name is a segmented menu page bar, giving a graphical
representation of the current page relative to the total number of menu pages. The
current menu page number displays in the lower right of the Navigation Display.
The Menu system operates either in Navigation or Edit mode, as indicated by the label
directly above the Right Knob. When the MENU Button is first pressed, the Menu system
NOTE
If a traffic advisory occurs when the Main Menu is
enabled, the Main Menu is removed from the display.
