background image

 

                                                                                        Evolution Evoflow Pump Manual

                                          

 

1.0  INTRODUCTION 

1.1.1  Congratulations on your recent purchase of an Evolution Evoflow Pump. Please 

take a moment to read through the entire manual before using the pump.  The 

pump must be installed and operated as specified. 

 

2.0  SAFETY 

2.1.1  The machines mentioned in the manual are specially designed for the pre-filtering 

and re-circulation of water in swimming pools. 

2.1.2  They are designed to work with clean water at a temperature not exceeding 35 

degrees Celsius (95 degrees Fahrenheit). 

2.1.3  The installation should be carried out in accordance to the safety instructions of 

swimming pools, especially Standard HD 384.7.702, and the specific instructions 

for each facility. 

2.1.4  The rules enforce on accident prevention should be carefully followed. 

2.1.5  Any modification of the pump requires the prior consent of the manufacturer.  

Original replacement  parts and accessories authorised by the manufacturer ensure 

a high level of safety. The manufacturer of the pump assumes no liability for the 

damage and injuries caused by un-authorised replacement parts and accessories. 

2.1.6  During operation, some parts of the pump are subject to dangerous electric voltage. 

Work may only be performed on each pump or on the equipment connected to it 

after disconnecting them from the mains power, and after disconnecting the starting 

device. 

2.1.7  The user should make sure that assembly and maintenance tasks are carried out 

by qualified authorised persons and that these persons have first carefully read the 

instructions for service and installation. 

2.1.8  The operating safety of the pump is only guaranteed if the installation and service 

instructions are correctly followed. 

2.1.9  The limit values stated in the. Technical table should not be exceeded under any 

condition. 

2.1.10  In the event of defective operation or fault, contact the technical support department 

of the manufacturer or its nearest authorised agents. 

2.1.11  If the supply cord is damaged, it must be replaced by an authorised service agent. 

 

                                                                                        Evolution Evoflow Pump Manual

                                          

 

 

 

 

 

 

 

POOL & SPA PUMPS

 

 

 

 

 

Installation and Operation Manual 

Storm Eco-V | Storm | Tuf | Stream 

 

 

1.0  INTRODUCTION ................................................................................................. 3 
2.0  SAFETY .............................................................................................................. 3 
3.0  GENERAL INSTALLATION ................................................................................. 4 
4.0  ELECTRICAL CONNECTION .............................................................................. 5 
5.0  PRIMING ............................................................................................................. 5 
6.0  MAINTENANCE .................................................................................................. 6 
7.0  TROUBLESHOOTING ......................................................................................... 7 

 

 

 

ECO-V

Summary of Contents for Evoflow Storm Eco-V

Page 1: ...id the warranty Notice to Installer This manual contains important information about the installation operation and safe use of this product Once the product has been installed this manual must be given to the owner operator of this equipment WARNING Evolution Evoflow Pump Manual 8 Evolution Water Lighting Solutions Phone 61 7 5565 0000 Fax 61 7 5565 0010 Email enquiries evolutionwls com au Web ww...

Page 2: ...uries caused by un authorised replacement parts and accessories 2 1 6 During operation some parts of the pump are subject to dangerous electric voltage Work may only be performed on each pump or on the equipment connected to it after disconnecting them from the mains power and after disconnecting the starting device 2 1 7 The user should make sure that assembly and maintenance tasks are carried ou...

Page 3: ...lution Evoflow Pump Manual 4 2 1 12 This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety 2 1 13 The appliance is not intended for use by young children Young children ...

Page 4: ... remove foreign matter and debris from around impeller Cavitations Improve suction reduce suction lift reduce number of fittings increase pipe size increase discharge pressure and reduce flow by throttling discharge valve 6 Motor over load cut outs Motor not connected properly Have electrician check wiring Low incoming voltage Have electrician check voltage ensure pump is not running on an extensi...

Reviews: