6
www.evolutionpowertools.com
(1.10)
INTENDED USE OF THIS
POWER TOOL
WARNING: This product is a Compound Mitre
Saw and has been designed to be used with
special
Evolution
blades. Only use accessories
designed for use in this machine and/or those
recommended specifically by
Evolution Power
Tools Ltd.
WHEN FITTED WITH A CORRECT BLADE THIS
MACHINE CAN BE USED TO CUT:
• Wood, Wood derived products (MDF, Chipboard,
Plywood, Blockboard,Hardboard etc),
Wood with nails,
• 50mm mild steel box section with 4mm
wall at HB 200-220,
• 6mm mild steel plate at HB 200-220.
Note:
Wood containing non galvanised nails or
screws, with care, can be safely cut.
Note:
Not recommended for cutting galvanised
materials or wood with embedded galvanised
nails. For cutting stainless steel we recommend
Evolution dedicated stainless steel blades.
Cutting galvanised steel may reduce blade life.
(1.11)
PROHIBITED USE OF
THIS POWER TOOL
WARNING:
This product is a Compound Mitre
Saw and must only be used as such. It must not be
modified in any way, or used to power any other
equipment or drive any other accessories other
than those mentioned in this Instruction Manual.
(1.13)
WARNING:
Do not allow persons
unfamiliar with the machine or these instructions
to operate the machine. Machines are dangerous
in the hands of untrained users. Children should
be supervised to ensure that they do not have
access to, and are not allowed to play with, this
machine. Children should be supervised to ensure
that they do not have access to, and are not
allowed to play with, this machine.
SAFETY PRECAUTIONS
(2.1)
POWER TOOL GENERAL
SAFETY INSTRUCTIONS
WARNING: When using electric tools basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
personal injury including the following.
Note:
This power tool should not be powered on
continuously for a long time.
WARNING: Read all safety warnings and
instructions before attempting to operate this
product and save these instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS &
INSTRUCTIONS FOR FUTURE
REFERENCE
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
(2.2)
1. General Power Tool Safety Warnings
[Work area safety]
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating power tool. Distractions can cause you
to lose control.
d) Do not use this machine in an enclosed room.
(2.3)
2. General Power Tool Safety Warnings
[Electrical Safety]
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching
outlets will reduce the risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock) When operating
a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use. Use
