101
Samba
Process
Please refer to ‘
3.15 NAS
’ for more details.
Transmission
Please refer to ‘
3.16 Transmission
’ for more details.
FTP
Configure your desired login User Name and Password.
Samba
security
Select to turn on / off password protect for Samba server. The default user
name is ‘admin’, and the default password is ‘123’.
Wireless Setup
There are 3 mode for you to select,
Infrastructure (AP) and Peer to Peer (Ad Hoc) and WPS (AP)
mode. Follow the prompting message on the screen and press
Red button to choose Peer to Peer (Ad
Hoc) or WPS (AP) mode.
Infrastructure (AP)
Infrastructure mode is used to connect computers with wireless network adapters, also known as
wireless clients, to an existing wired network with the help from wireless router or access point.
Please follow following steps to configure your wireless network.
Step 1, Scanning AP
（
Access Point
）
in your network
Follow the on-screen information and press the
Zoom button to select Infrastructure (AP) mode and
update the access points list, and all SSID will be displayed on the screen.
Step 2, Input WEP/WPA key.
Press
OK to input encryption keys via the virtual keyboard, OK to confirm and to start testing the
connection.
The testing process will take for a while, please be patient to wait. If the test is ok, the network
information (Profile Name, IP address, Subnet Mask, Gateway, etc.) will be displayed on the screen.
Peer to Peer (Ad Hoc)
Peer to Peer mode, which is also called Ad Hoc mode or computer-to-computer mode, is used to
connect wireless clients directly together, without the need for a wireless router or access point.
WPS (AP)
