11
3)
After a while, the
and
symbols will start to flash, confirm by pressing Enter
.
4)
Then the
symbol will start to flash, use the
/
symbol to set the current hour, confirm
by pressing Enter . Use the
symbol to set the minutes. The
will display a number
between 1 and 7, set the day of the week. The number 1 means Monday.
5)
Then the
symbol will appear on the display and the motor will move, verifying the
movement from the open to closed position and back. Wait for this process to complete. It will
take approximately 1 minute.
6)
Press and hold Enter
for 5 seconds. Then press the
button 5 times until
starts to
flash.
7)
Press Enter
and the
symbol will glow steadily.
8)
Press and hold Enter
for 5 seconds and the
symbol will start to flash quickly. You have
now completed setting of the pairing mo
de of the valve actuator
. If the setting failed and the
symbol is not flashing quickly, repeat the above steps starting with 5).
Note: The icons
on the display go out after a period of inactivity
-
click on any button first to wake up the display.
9)
In the
app, click on the already paired Gateway and click on the
button on the
bottom of the screen. On the next page you will see a
button. Do not click on it yet.
Ideally, have this button ready on your mobile phone; next to it, activate the pairing mode o
f the
valve actuator, point 7), so the
symbol will start to flash quickly and then click on the
button on your phone. Within a few seconds, the valve actuator will be assigned to
your app. If not, repeat steps 8) and 7).
Valve actuator setting in the mobile app
Weekly programming
Do you still need advice after reading this manual?
Read FAQs at www.evolveo.com first or contact the EVOLVEO technical support.
Warranty and post
-
warranty service
Repairs and service may only be carried out at an authorized EVOLVEO service centre (more at
www.evolveo.com), otherwise you can damage the device and lose the warranty.
The warranty DOES NOT APPLY to
:
This scale on the home page of the mobile app shows the set temperature; text with a
smaller font indicates the current room temperature.
Use this symbol to switch between the heating modes: Manual, Automatic, Comfort,
Booster, Holiday, Automatic, Eco.
Use this symbol to go to Settings and turn on: Child lock, Calibration, Temperature limits
etc.
Select the valve actuator in the mobile app.
Click on the Settings symbol.
Select the last option
in the menu.
PASSWORD
Enter: 123456
.
PERIODS
Edit working days
/
weekends
using a schedule.
