8
Application
The UPS is intended to maintain power supply in the event of power outages.
THE PRODUCT IS NOT INTENDED FOR INDUSTRIAL USE.
Operation
Place the product on a flat and solid surface using the handle (2), so there is no risk of slipping or
falling.
Plug the product's power cord into a ~ 220V / 50Hz earthing socket. If you are
using extension cables, make sure they also have a grounding circuit.
Connect the consumer card to the outlet of the product (3).
ATENTION! ALWAYS CHECK THAT WORKING TENSION AND FREQUENCY OF
CONSUMERS MEET PRODUCT SPECIFICATIONS (~220V, 50Hz)!
Press the on / off switch (2) long to turn on the power supply.
You can see the following values on the LCD:
1.
Supply voltage
2.
Output voltage
3.
Charge level of the battery
4.
Battery mode (when the product is not powered)
5.
Network power mode (when the product is powered from the network)
6.
Load level
To stop the product, press the on / off switch (2) long.
Summary of Contents for 678996
Page 10: ...10...