10
Application
DO NOT USE THE PRODUCT FOR ANY OTHER OPERATIONS FOR WHICH IT IS
NOT DESIGNED.
The product is intended for personal use for tilling small areas.
IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Assembly
Disconnect the power plug before carrying out any adjustments or maintenance.
Installing the handles
Attach the mid segments of handles on the lower part of the frame using the bolts and the wing nuts
(Fig. 1).
Install the superior handles by introducing the left and rioght handles on the plastic support holes.
Then attach the assembly to mid segments using bolts and wing nuts (Fig. 2).
WARNING! The motor housing must be in front of the handles.
FIG. 1
FIG. 2
Installing the blades
The blades assembly must be fixed on the gearbox shaft using for each side a bolt and a nut. Attach
the left and right blades assemblies on the gearbox shaft in such way that the fixing holes match.
Put the bolt in the fixing hole and tighten the nut.
WARNING! Disconnect the power plug before mounting/dismounting the blades.
WARNING! Before any operation related to blades assembly, wait for it to stop
completely.
