15
KPM.X.Systemhandbuch_X3.0.EN.V1.9 | 05/2019 | Subjects to misprints and technical changes.
2.1.1.1
Xesar escutcheon
—
functional description
Figure 4: Xesar escutcheon (sample image)
Reader unit
The reader unit sensor is located on the outside of the Xesar escutcheon between the connector
(EVVA logo) and visual indicator (LED).
Functional principle
The outside handle is disengaged by default
–
operating the outside handle will not change the
position of the latch. Hold an authorised identification medium to the reader unit, the outside handle
is mechatronically engage for five seconds. If you operate the outside handle during this period,
the latch or bolt (depending on the lock type) will move.
The inside handle is always engaged and can be operated at any time. In this process, the mecha-
nism always unlocks the latch.
Xesar escutcheons feature an event memory for the last 1,000 events. Once the event memory is
full, the system overwrites the oldest entries with the most recent events. For this reason, it is
important to regularly synchronise events to prevent event records from being lost.
Please refer to the corresponding data sheet for additional specifications at:
https://www.evva.com/uk-en/products/electroniclockingsystemsaccesscontrolsystems/xesar/
Please note the continuous release function (see section:
) and the different acoustic and visual signals
(
Section:
Xesar access components signal events
Please note that if access components are installed in fire doors, the certifi-
cates are exclusively valid in conjunction with approvals from the correspond-
ing door manufacturer.
Please also note the following, important notices before use!
Important notes on use, general legal information, danger to life and limb, risk of
explosion, climatic and environmental effects, installation instructions and use
of batteries; please refer to our safety instructions on operation and cleaning
which are included and can be found on our website at:
en/products/electroniclockingsystemsaccesscontrolsystems/xesar/
Visual signals
Reader unit
Connection cable
Handle