26
KPM.X.Systemhandbuch_X3.0.EN.V1.9 | 05/2019 | Subjects to misprints and technical changes.
2.1.4
Xesar wall reader
Figure 11: Xesar wall reader (sample image)
Xesar wall readers are suitable for indoors and outdoors, surface-mounted or flush installation and
for zones critical to security.
Please use the dedicated seal enclosed with the product for use outdoors or in zones that are
exposed to water as well as in the event of surface-mounted installation. Observe the information
in the assembly manual. Xesar wall readers are connected to the Xesar control unit and supplied
with power using a connecting cable.
Please note Xesar wall readers can only be used in connection with Xesar
control units.
The connector is intended solely to synchronise the unit with the Xe-
sar tablet, Xesar wall readers cannot be operated with the optionally
available emergency power device!
Connect the Xesar wall reader to Xesar control units to operate electronic components, such as
motorised cylinders, swing doors, sliding doors, etc.
Please check carefully to make sure the Xesar product you selected is suitable for your application.
We have made the required data sheet available in the download section of our homepage:
https://www.evva.com/uk-en/products/electroniclockingsystemsaccesscontrolsystems/xe-
sar/#tab6
2.1.4.1
Xesar wall reader
—
functional description
Figure 12: Xesar wall reader (sample image)
Visual signals
Reader unit + ON/OFF status light
Connection cable