33
KPM.X.Systemhandbuch_X3.0.EN.V1.9 | 05/2019 | Subjects to misprints and technical changes.
Additional specifications are available on the corresponding data sheet at
https://www.evva.com/uk-en/products/electroniclockingsystemsaccesscon-
trolsystems/xesar/
2.5
Xesar tablet
Figure 20: Xesar tablet (sample image)
The Xesar tablet is intended to synchronise and transfer information between Xesar software and
Xesar access components.
The Xesar programming unit includes a proprietary EVVA connection cable. Use the connection
cable to link your Xesar access components to the Xesar tablet. You can identify the connection
cable by the EVVA logo located on the USB connector.
All Xesar access components feature an interface at the front, behind the connector cover (EVVA
logo). Slightly press towards the inside on the left-hand side of the EVVA logo (near the "E") and
fold out on the right-hand side (near the "A") to access it.
The integrated interface of the Xesar access component in conjunction with the Xesar programming
unit is designed to synchronise Xesar software and Xesar access components only.
After use, once again carefully close the connector cover (EVVA logo) of your Xesar access compo-
nents to continue to protect the connector from penetrating dust and humidity.
For this purpose, do not use pointed objects to prevent damage.
Please refer to the corresponding data sheet for additional specifications at
https://www.evva.com/uk-en/products/electroniclockingsystemsaccesscontrolsystems/xesar/
.
Do not install additional applications as otherwise EVVA will be una-
ble to safeguard the product security and functionality of the system!
Do not install operating system updates!
The Xesar tablet is unsuitable as an emergency power supply for battery-
operated Xesar access components.