Xesar 3.0 | V 3.0.216
6 / 11
To avoid an IP address conflict, be careful
NOT
to use the default IP
address of the Xesar network adapter (
192.168.1.100
).
(If there is an IP address conflict, a connection can not be
established.)
Please contact your system administrator if you encounter any
issues during setup.
2.2
Commissioning a Xesar network adapter
Connect the mains adapter to the Xesar network adapter.
The green, flashing status LED indicates whether the Xesar network adapter is
supplied with power.
Then connect the Xesar network adapter to the configuration PC.
For this purpose, use an RJ45 LAN cable and make sure the connector engages
audibly in the socket.
Figure 4: Xesar network adapter - connections
Open the Internet browser on your computer.
