Xesar 3.0 | V 3.0.216
7 / 11
Enter the standard address of the Xesar network adapter in the browser's address
bar – this can be found on the bottom of the device, it is set to
192.168.1.100
by
default.
Figure 5: Xesar network adapter | IP address (updater)
If you cannot open the configuration page, check the firewall
settings of your PC, the IP settings, and also the correct wiring of
the Xesar network adapter.
You will be directed to the system page of the Xesar network adapter.
Status page
On the status page, enter a password for security. This is optional and not
absolutely necessary. The default administrator name used to login is "admin". No
password has been assigned.
The Device name can be individually configured and it does not influence the
device function.
The Login password restricts access to the device configuration page.
A default password has not been configured.
Figure 6: Xesar network adapter - Login
