Installation Manual MK-Series
7/10
2.2
Place a screwdriver flat in te opening of the socket.
2.3
Place the ground (yellow and green) cable in te
socket and remove the screwdriver.
2.4
Unscrew the screw at –V and +V.
2.5
Place the blue camera wire in -V.
2.6
Place the brown camera wire in +V.
3.
Connecting the main power cable:
Place the main power cable through the cable
gland.
Place a screwdriver flat in the opening of the socket.
Place the ground (yellow and green) cable in the
yellow and GREEN socket and remove the
screwdriver.
Place the plus (brown) in the GREY socket and
remove the screwdriver.
Place the minus (blue) in the BLUE socket and
remove the screwdriver.
The power installation is ready. If you turn on the power, a green LED will light up.
The pwer cable is now ready to be connected to the connector of the PT unit.
2.1 INSTALLATION OF THE POWERBOX
