E-80-136KTL User Manual
Copyright ©EVOLVE ENERGY GROUP CO.,LTD
- 52 -
5.
On-Off Control
Inverter on-off local control.
6.
Set Energy
Set the total power generation. You can modify the total power generation
through this option.
7.
Set address
Set the address (when you need to monitor multiple inverters simultaneously)
，
Default
01.
8.
Set Input mode
E- 75~136KTL has 8-12 MPPT, these MPPTs can work interdependently, or
divided into parallel mode. User can change the setting according to the
configuration
9.
Set Language
Set the inverter display language.
10.
MPPT Scan
Shadow scanning, when the component is blocked or abnormal, causing
multiple power peaks, by enabling this function, the peak point of maximum power
can be tracked.
11.
Logic interface
Enable or disable logical interfaces. It is use for below standard Australia
(AS4777), Europe General (50549), German (4105)
12.
Set Power Ratio (The country is set at 10)
Set generation ratio.
（
B
）
Event List
：
Event List is used to display the real-time event records, including the total
number of events and each specific ID No. and happening time. User can enter Event
List interface through main interface to check details of real-time event records,
Event will be listed by the happening time, and recent events will be listed in the
