E-80-136KTL User Manual
Copyright ©EVOLVE ENERGY GROUP CO.,LTD
- 2 -
When inverter is working, it contains lethal voltages and become hot in some area.
Improper installation or mis-operation could cause serial damage and injury. To
reduce the risk of personal injury and to ensure the safe installation and operation
of the product, only a qualified electrician is allowed to execute transportation,
installation, commissioning and maintenance. EVOLVE ENERGY GROUP CO.,LTD does
not take any responsibility for the property destruction and personal injury because
of any incorrect use.
Label and Symbols
E- 75~136KTL has type label attached at the side of product which contain important
information and technical data, the type label must permanent attached to the
product.
E- 75~136KTL has warming symbol attached the product which contact information
of safety operation. The warming symbol must be permanently attached to the
product.
Installation location requirement
Please install the inverter according to the following section. Place inverter in an
appropriate bearing capacity objects (such as solid brick wall, or strength equivalent
mounting surface, etc.) and make sure inverter vertically placed. A proper
installation location must have enough space for fire engine access for maintenance
if faulty occur. Ensure the inverter is installed in a wall ventilated environment and
have enough air cooling cycle. Air humidity should be less than 90%.
