8
Cleaning the floor pads
• All pads and floor attachments are washable.
• The brushes, polishing pads and scouring
pads can be washed under the tap with warm
soapy water.
• The polishing unit is not suitable for washing
in water, it must be wiped with a damp cloth.
•
Smeary marks are made on floor when
polishing
- Has the polish/wax been allowed to dry?
- Does old polish/wax need to be removed?
•
No gloss sheen is being produced
- Floor wax level may need to be increased, try
another coat. Allow to dry and re-polish.
- However some types of floor do not produce
gloss finish.
•
Scratches are made on the floor
- Check for grit or dirt stuck to the pads or
wheels.
- Clean/replace pads or clean wheels.
•
Floor is too slippery
- Check the polish/wax is designed to be used
on floors. Floor wax should produce a glossy
but gripping finish.
Technical Data
Power
160W
Voltage
120V~
Current
1.3A
Frequency
60Hz
Rpm
2100
Sound Pressure 80dB(A)approx
Summary of Contents for FP160
Page 9: ...9 Notes ...
Page 10: ...10 Notes ...
