16
CL S M
5.5 Storage
Pack the device in its original packaging for storage.
• Do not store outside.
• Storage should be dry and dust-free.
• Keep away from any aggressive media.
• Protect from UV radiation.
• Avoid mechanical vibrations.
• Storage temperature: -20 to 40 °C
• Relative atmospheric humidity: max, 95% (no build up of
condensation).
• To store longer than three months, check the general con-
dition of all parts of the packaging on a monthly basis. If
necessary, refresh or renew the conservation.
Note
It is possible that there are notices on the packaging con-
cerning storage which go beyond the requirements listed
here. If so, follow those notices.
5.3 Returning module to
the manufacturer
Proceed as follows for the return transport:
1. Dismantle the device if necessary (see 10 Dismantling)
2. Pack device in its original packaging. Follow storage
conditions (see 5.5 storage).
3. Send to manufacturer. The address is listed on the back
cover of this manual.
5.4 Packaging
For packaging
The individual packaged pieces have been packaged appro-
priately according to the expected transport conditions.
Only environmentally friendly materials were used for the
packaging.
The packaging is supposed to protect against corrosion and
other damage until they are ready for installation. Therefore,
do not destroy the packaging for possible return shipment to
the manufacturer (see 5.3 Returning module to the
manufacturer).
Example of packaging
Whendispose of the packaging, please note and adhere to
the following.
Note
Environmental damage due to incorrect disposal
Packaging material consists of valuable raw materials and in
many cases they can be sensibly recycled and reused.
Therefore:
• Dispose of packaging material in an environmentally correct way
• Comply with locally applicable disposal regulations.
